BLOGS
14 Inch Diamond Blade for Cured Concrete (350mm): Walk-Behind Saw Guide
The 14 inch diamond blade for concrete (350 mm) is the entry size for walk-behind and flat saws. Designed for cured concrete, laser-welded or high-frequency-welded segments deliver excellent cutting speed and long life on floors, driveways and slabs.
Why Cured Concrete Needs a Dedicated Blade
Cured (aged) concrete is hard and dense — very different from green (fresh) concrete. A cured-concrete blade uses a bond matched to hard material so worn diamonds release steadily and cutting speed stays high throughout the blade's life.
Specifications (Construction Blade Series)
| Diameter | Segment height | Thickness | Segments | Bore |
|---|---|---|---|---|
| 350 mm (14") | 10/12/15 mm | 3.2 mm | 24 | 25.4/27/50 mm |
| 400 mm (16") | 10/12/15 mm | 3.2 mm | 28 | 25.4/27/50 mm |
| 450 mm (18") | 10/12/15 mm | 3.6 mm | 31 | 25.4/27/50 mm |
| 500 mm (20") | 10/12/15 mm | 3.6 mm | 35 | 25.4/27/50 mm |
Advantages
- ~125 mm cutting depth at 350 mm diameter — covers most slab work.
- Laser/high-frequency welding: segments withstand the heat and load of machine cutting without detaching.
- Fast, straight cuts with excellent performance and free chipping.
- 15 mm segment height option: maximum life for road and floor contractors.
Selection Tips
- Match bond hardness: hard cured concrete → softer bond; abrasive/green concrete → harder bond.
- Confirm bore (25.4/50 mm) and pin-hole pattern against your saw.
- Cut wet whenever the saw allows — longer life, less dust.
FAQ
Can a cured concrete blade cut asphalt?
Briefly, but asphalt's abrasiveness destroys concrete bonds quickly. Use a dedicated asphalt blade with undercut protection.
What about rebar in the slab?
Quality laser-welded blades handle occasional rebar. Heavy reinforcement calls for a reinforced-concrete bond specification.
How many linear meters does a 350 mm concrete blade last?
Highly variable — from a few hundred meters in hard aggregate to 1,000+ in medium concrete at proper speed and water flow.
Related Topics
- Laser Welded vs Sintered Diamond Blades: Which Construction Method Lasts Longer?
- Segmented vs Turbo vs Continuous Rim: The Complete Diamond Blade Selection Guide
- Cutting Disc Size Guide: 4.5" vs 5" vs 7" vs 9" — Which One Do You Actually Need?
- The Best Brand for Brazed Blade
- What Is a Wire Brush Used For? Metal Cleaning & Surface Prep Guide
- Top 5 Flap Disc Factory in China
- Top 10 Cutting Disc Manufacturers in China (2026)
RELATED NEWS
How to Cut Metal Roofing: The Right Disc and the Right Way
Cutting metal roofing wrong ruins the coating and invites rust. The best discs and methods for corrugated, standing seam and sheet roofing — clean cuts, no burn.
10 Inch Table Saw Blade (250mm): 60T vs 80T vs 100T for Woodworking
The 10 inch table saw blade (250/254mm) is the workshop standard. Compare 60T, 80T, 100T and 120T tooth counts for ripping, crosscutting and fine finishing.
9 Inch Diamond Blade for Concrete (230mm): Deep Cuts on Large Grinders
The 9 inch diamond blade (230mm) gives ~70mm cutting depth for concrete, brick and stone. Segmented vs turbo comparison, specs, RPM and safety tips.
7-1/4 Inch Circular Saw Blade (180/185mm): The Framing Standard
The 7-1/4 inch circular saw blade (185mm) is the global standard for handheld circular saws. Tooth count guide 40T/50T/60T, specs and best uses for wood cutting.
End Brush (Shaft-Mounted): Precision Wire Brushes for Die Grinders
Shaft-mounted end brushes fit die grinders for deburring, derusting and cleaning in holes, corners and internal surfaces. Sizes 40–80mm, uses and tips.
How to Cut Rebar with an Angle Grinder: Disc Choice and Technique
The fastest way to cut rebar on site is an angle grinder with the right disc. Which disc, what thickness, and the technique for clean, fast rebar cuts.
ONLINE MESSAGE
JKINGS is a global industrial brand committed to high-performance abrasives and tools. Built on advanced Industry 4.0 manufacturing and extensive OEM expertise, we deliver precision, durability, efficiency, and reliability for cutting, grinding, and beyond.
PRODUCTS