jkings

BLOGS

9 Inch Cutting Disc (230mm): Max Depth Cutting for Heavy Industry

Aug 20,2026

Frank Lee

The 9 inch cutting disc (230mm) delivers maximum cutting depth for large angle grinders. See advantages, T41/T42 specs, 6640 RPM rating and heavy-industry uses.
图片名称

9 Inch Cutting Disc (230mm): Max Depth Cutting for Heavy Industry

The 9 inch cutting disc (230 mm) is the largest standard cut-off wheel for handheld angle grinders. With roughly 70 mm of cutting depth, it handles large-scale, heavy-duty cutting jobs that smaller discs cannot finish — structural steel, large pipe, rebar bundles and machinery maintenance.

Where 9 Inch Cutting Discs Are Used

  • Construction sites: cutting rebar, structural sections, formwork hardware
  • Fabrication workshops: large-diameter pipe and thick profiles
  • Machinery maintenance and demolition
  • Shipbuilding, bridge and steel-structure work

Key Advantages

  1. Maximum cutting depth: ~70 mm, the deepest handheld cut before moving to a chop saw.
  2. Industrial-grade strength: built for extended use under high load and heat.
  3. Fast material removal: optimized abrasive structure for aggressive performance.
  4. Stable at high RPM: rated 6,640 RPM / 80 m/s for operator safety and cutting precision.
  5. T41 and T42 versions: flat discs for cutting, depressed-center for cutting + light grinding.

Specifications

TypeSize (mm)Size (inch)Max RPM
T41 flat230 × 1.6 × 22.29" × 1/16" × 7/8"6,640
T41 flat230 × 1.9 × 22.29" × 1/13" × 7/8"6,640
T42 depressed center230 × 2.0 × 22.29" × 5/64" × 7/8"6,640
T42 depressed center230 × 2.5 × 22.29" × 1/10" × 7/8"6,640
T27 grinding230 × 6.0 × 22.29" × 1/4" × 7/8"6,640

Safety & Selection Tips

  • Use only on 230 mm grinders with the guard correctly fitted; a 9" disc stores significant kinetic energy.
  • Let the disc reach full speed before contacting the workpiece; avoid twisting in the cut.
  • Choose 1.6–1.9 mm for speed, 2.0–2.5 mm T42 for combined cutting/grinding and maximum durability.

FAQ

How deep can a 9 inch cutting disc cut?

Approximately 65–70 mm in a single pass, depending on grinder guard and flange design.

What is the difference between T41 and T42 in 9 inch discs?

T41 is a flat disc for straight cutting only. T42 has a depressed center that raises the flange, allowing the disc face to be used for light grinding as well as cutting.

Can a 9 inch disc cut stainless steel?

Yes — select an INOX-rated 9 inch disc. For heavy stainless sections, a 2.0 mm single crystal corundum disc offers the best life and finish.


Related Topics

RELATED NEWS


Sharpen or Replace? How to Judge a Worn Saw Blade and What It Is Worth

A quality TCT blade can be sharpened 3-5 times — a cheap one often cannot. The signs of a dull blade, sharpening economics, and when to bin it.


How to Cut Laminate Flooring Without Chipping: Saws, Blades and Technique

Laminate chips and dulls blades like few materials. The right blade for each saw, which face to cut from, and how to keep edges factory-clean.


How to Cut Acrylic (Plexiglass) with a Circular Saw Without Cracking or Melting

Acrylic cracks from vibration and melts from heat. The right blade, speed and support for clean, crack-free circular saw cuts in plexiglass sheet.


How to Clean a Saw Blade: Removing Pitch and Resin Buildup

A dirty blade cuts like a dull one — burning, straining, tearing. How to clean pitch and resin off saw blades safely, and when cleaning is not enough.


Choosing a Miter Saw Blade for Trim and Fine Finish Work

Trim carpentry lives or dies on the miter cut. Tooth count, grind, hook angle and blade quality for glass-smooth cuts in molding, casing and trim.


Metal Cutting Saw Blade (Cold Saw): Low-Spark Cutting for Steel & Stainless

Metal cutting saw blades (MTCG) for cold saws cut steel and stainless with low spark, no dust and cool burr-free edges. Sizes 136–455mm, tooth guide.

%{tishi_zhanwei}%

Messages

图片名称

If you are interested in our products, please leave us a message and we will reply as soon as possible!

%{tishi_zhanwei}%